[Car Washing Machine] Types of Car Washing Machines Steps for Using Car Washing Machines
Types of Car Washing Machines
strong>
There are two main types of car washers: those that require power (with submersible pump) and those without power (similar to a pump).
1, with power supply:
The water volume is about10kg. The nozzle is made of copper adjustable spray gun, which sprays water into mist to ensure strong momentum and achieve the purpose of maximizing water conservation. 1Buckets of water are enough to clean 1 medium-sized cars.
Using car12V DC power supply, connected to the car cigarette lighter power supply. The price is relatively expensive.
2, without power supply:
and above Similarly, the water volume is about 8–10 liters. Inflate through the pump handle and then spray water by gas pressure (the principle is the same as a sprayer for spraying pesticides) . The price is relatively cheaper.
Advantages of vehicle-mounted car washers
1 , manual pumping, no power required, energy saving and environmental protection.
2. The surface of the water spray brush is soft and elastic and will not damage the car paint.
3. The fan-shaped atomized water with pressure is sprayed from the brush, which can be washed while brushing, avoiding the shortcoming of the rag becoming dirty as it is washed, and doubling the efficiency.
4, soft high-pressure water outlet pipe, lengthened to 2.5 meters, convenient for cleaning operations on car roofs and other high locations.
5. The handle switch is designed in line with ergonomic curves. It can be used for spot spraying or long spraying, which is more water-saving.
6. The product has safety protection devices to ensure the safety of the operator.
7, equipped with a spray gun, which can wash away the mud on the car chassis and tires.
8, simple to operate and easy to carry.
Car washing machine Steps for use
Preparation before use:
1 , open the car washer, fill a bucket or other container with clean water;
2, pull out the filter from the bottom of the machine, check whether the filter holes are unobstructed, and remove the Insert the filter into a bucket or other container, and lie horizontally at the bottom of the bucket (or other container);
3Insert the other end of the car washing machine into the flushing gun water inlet connector, and then Plug the cigarette butt of the power cord into the car’s cigarette lighter socket and prepare it for use.
Usage procedures: flush the sediment first—then brush the car—and then flush the car
1. Open the spray gun, evacuate the air inside the machine first, and adjust the nozzle to scattering mode to clean the vehicle surface of sediment.
2. Pour the car wash liquid into the bucket (or other container) according to the proportion and mix well;
3, Use Use the spray gun to wash away the sediment from the car body;
4. Adjust the nozzle to a scattering shape, put the spray gun and the car body at an oblique angle to wash the car body, and wash it from top to bottom. Rinse the car body with cleaning fluid;
5, use a cotton towel to dry the water on the car body.
After use:
Drain the water in the spray gun, unplug the power cord, and disconnect the water pipe from the cleaning machine and spray gun. Pull it off; take out the filter from the bucket or other container, clean the filter holes, then wrap it around the foot of the cleaning machine and put it in the box for later use.
In addition, before turning on the electric pump, be sure to insert the water inlet pipe into the water, otherwise the pump willAir enters to reduce pressure. If you encounter this situation and find that the product cannot enter the water, it may be that too much air has entered the water inlet pipe, causing the machine to pump water without pressure. You can forcefully fill the water inlet pipe with water, and at the same time open the water gun to discharge the air, and it can be used normally. . The adjustment ring of the spray gun can adjust the water flow to mist, scattering or direct spray.
If the website content violates your rights, please contact us to delete it。
