1. What do tower crane workers do
Tower crane workers are workers responsible for running and operating tower cranes. They are also called tower crane drivers. Their main job is to lift steel bars and wood used in construction. Equipment for corrugated steel, scaffolding pipe and other construction raw materials. The main job responsibilities of tower crane workers are:
1. Strictly abide by the safety technology and operating procedures of lifting machinery, and be proficient in the structural principles and technical performance of tower cranes.
2. Adhere to daily inspection and maintenance. If any major problems are found, stop using them immediately and report to the leadership for treatment in a timely manner.
3. Obey the management arrangements of the project department. Drivers on duty should strictly abide by their jobs and are not allowed to leave without authorization.
4. When the tower crane is undergoing overhaul and maintenance, actively cooperate with the maintenance personnel and become familiar with the maintenance status and performance of the tower crane.
5. It is necessary to closely cooperate with the commanding personnel to carry out safe operations. When there is no one to command, the command signal is unclear, or the weight of the object is too heavy, no operation is allowed.
6. For tower cranes operating in two shifts, the driver on duty should carefully fill in the shift record. The hidden dangers and faults during operation must be clearly filled in and clearly handed over to the successor in person.
7. Daily inspection and maintenance records should be recorded in a timely manner.
8. Strictly abide by the company’s rules and regulations and complete various temporary tasks assigned by leaders.
2. How does a tower crane driver get on the tower crane
Tower crane is a common lifting machinery on construction sites. It is often several hundred meters high. There is an operating room above, and the tower crane driver is operating it. When operating a tower crane indoors, how does the tower crane driver get up to such a high tower crane? Did you climb up there?
In fact, tower crane drivers really climb up the tower crane. Generally, there are three main ways for tower crane workers to climb up the tower crane:
1. Climb up with bare hands
For tower cranes that are not too high, the tower crane driver can climb directly, put on gloves and safety ropes, and then climb directly to the cab through the stairs inside the tower crane. A tower crane master can be said to have experienced this situation countless times. Normally climbing a tower crane, such as a tower crane of about 100m, takes about an hour, with 3 to 5 breaks in between.
2. Take the elevator on the construction site and then climb up with bare hands
It is not practical for a relatively tall tower crane to climb up directly. However, in this case, Next to the tower crane, there is usually a building that has been built to a certain height. In this case, the building next to it will have a temporary elevator. The tower crane engineerFu can take a temporary elevator to a fixed floor, then walk to the tower crane through a homemade staircase, and then climb up with bare hands.
3. Use a crane to send people to a certain location, and then climb up with bare hands
This method is similar to the second method, but it is not always possible. There is a crane nearby, so this method is generally used less often.
If the website content violates your rights, please contact us to delete it。
