1. What is the standard for adding nitrogen to hook machine breaker
The function of nitrogen is to amplify the energy of the blow and give the breaker a stronger vibration, so the nitrogen The amount of nitrogen determines the power of the breaker. If there is insufficient nitrogen, the crushing effect may not meet the requirements, which will cause the breaker to feel weak and even cause damage to the parts inside. The maintenance cost is very high.
When you see this, some people may think, can I add more, so that there will be no weakness. This is actually wrong. Adding more nitrogen will make the breaker more powerful and improve work efficiency, but this is the same as taking stimulants. Excessive overdraft capacity will cause the internal pressure to be too high, causing the breaker to fail to work, or As a result, the hydraulic oil cannot push the lever and malfunction occurs.
In fact, when adding nitrogen to the hook machine breaker, there will be a pressure gauge. When adding nitrogen, we need to adjust it to a normal working range. Generally, it is normal around 1.4~1.6 Pa. situation, and sometimes we can add or reduce it according to the actual working conditions, but the range should not be too large.
2. How to add nitrogen to the hook machine breaker
How to add nitrogen to the hook machine breaker The specific methods are as follows:
1. Select the appropriate nitrogen source and nitrogen pressure
To add nitrogen to the hook machine breaker, you need to select the appropriate nitrogen source and nitrogen pressure. Generally speaking, you can choose nitrogen sources such as high-pressure gas cylinders, compressed air systems or liquid nitrogen tanks. When selecting the nitrogen pressure, it should be determined according to the specific needs of the hook machine breaker. It is generally recommended to be between 1.4-1.6 Pa.
2. Connect the nitrogen source and the hook breaker
Special pipes and joints are required to connect the nitrogen source and the hook breaker to ensure a firm connection. and seal. Before connecting, check whether the relevant pipes and joints are intact to avoid gas leakage.
3. Adjust nitrogen pressure
It is necessary to adjust the nitrogen pressure before adding nitrogen. First, connect the nitrogen source to the hook breaker, and slowly open the valve of the nitrogen source to allow nitrogen to slowly enter the hook breaker. During the filling process, you need to constantly check the reading of the air pressure gauge to ensure that the air pressure is within the normal range. Generally speaking, the adjustment of nitrogen pressure needs to be based onIt depends on the specific situation and cannot be generalized.
4. Check the air pressure
After adding air, you need to check the air pressure to ensure that the hook machine breaker has reached the required air pressure. The air pressure can be detected using tools such as a barometer. If the air pressure is found to be insufficient or too high, corresponding adjustments need to be made.
If the website content violates your rights, please contact us to delete it。
